C H I P P E N D A L E
C H A I R

1. Stand up arms (c) on level ground ensuring arm rests are on the outside of the chair.  Space the arms apart by the width of the seat.
2. Put the seat (b) into place between the arms, matching up the joints and the curve of the seat.  Use  3" lag screws and washers to attach arms to seat in rear predrilled holes.  Use 3 1/2" lag screws and washers to attach arms in front predrilled holes.
3. Place seatback (a) onto arms with the flush side on the seating side.  Screw into predrilled holes using 2 1/2" wood screws.  Flip the chair over and screw in 2 1/2" wood screws under the seat on side walls.
4. Finish by screwing in wood triangles onto front legs and seat using 1 1/2" screws.